Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

Fuji CP4-3

Views: 1165



Fuji CP4-3 | 10 July, 2006

Hi All,

Lately we have been getting a humming noise which seems to be coming from one of the D-axis motors on the CP4.

If it happens the Op. hits the e-stop and resets the machine which clears the noise and machine runs fine.

Obviously there is an underlying problem with the Motor but I would appreciate any comments of what I could be looking at here?



reply »


Fuji CP4-3 | 11 July, 2006

Are the axis's lubricated? Check the servo amp null and 0 speed settings.


reply »

SMT Custom Nozzles

Reflow Ovens thermal process improvement