Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


MPM Ultrapint series 2000

Views: 1048

#42271

MPM Ultrapint series 2000 | 19 June, 2006

"Z tower obstruction - machine must reset". I�m having this problem in the machine... please help!!

reply »

#42274

MPM Ultrapint series 2000 | 19 June, 2006

Check for anything that may contact while activating Z tower (support, wire, connector, etc) I also saw one day a lost PCB causing that kind of problem ?!?!?!?

reply »

Chunks

#42277

MPM Ultrapint series 2000 | 19 June, 2006

There is also plastic link on the shaft that raises your Z-Table that may have come lose or broken. Is the Z-Table able to move up and down in Supervisor mode?

reply »

#42284

MPM Ultrapint series 2000 | 19 June, 2006

Try raising the table in Calibrate mode. Sensor or Tactile connector could be contacting the underside of the rails and overloading the axis. Check for 24V on the Z-axis brake. Check the fuse(F5) and voltage to the driver. Check DIP switch setting. How much does it move before the error?

reply »

Plasma Prior to Conformal Coating

PCB machines