Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


SUZUKI Pick and Place Machine

Views: 2786

#41926

SUZUKI Pick and Place Machine | 1 June, 2006

I have a Suzuki vision machine with 4 heads (SMT-1000VL). This machine is using the camera to inspect the nozzels (4 sets) in the nozzel tray changer every time it is going to change the nozzel(s) in the 4 heads. The problem I have is now the machine got stuck at the first set of nozzel inspection with an error message "Nozzel setting error". There is no instructions of nozzel setting in the manual and there is no English support from where I bought the machine. Can some one help?

reply »

#41965

SUZUKI Pick and Place Machine | 3 June, 2006

Hello, We are SUZUKI SMT machines distributor in India & we have trained manpower. You may pl. contact our service manger off-line at his email ID : smtsupport@smt-india.com and he will try to help you on this

reply »

#42147

SUZUKI Pick and Place Machine | 13 June, 2006

I asume you are in the US. I would send an email directly to suzuki's technical support team. tech@suzukinet.co.jp

Enjoy, Cal Driscoll

reply »

#42366

SUZUKI Pick and Place Machine | 22 June, 2006

Hi netellink,

I am not familiar with suzuki machines, but it usually works that way. There is a sign on the nozzle(it could be dots or lines...)and a recognition file for it. So you have to check:

- if the sign the machine is looking for is damaged or dirty or missing - check and clean the optical system(mirrors, camera lens..)

-find the recognition file responsible for it and change it.

Good luck!

reply »

ii-feed SMD Intelligent Feeder