Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Fuji CP feeder calibration

Views: 3091

#40908

Fuji CP feeder calibration | 10 April, 2006

Is anyone out there using the newer style Fuji feeder calibration jig ? It's the one that has the LCD on it.

My current feeder cal jig just measures pick point center. This newer style gauge measures advancing arm height,bend in the advancing arm bracket, and it also allows you to bend the feeder in the X direction if need be. I think it also does some other stuff...

I was never aware that I needed to be checking all of these things.

reply »

#40973

Fuji CP feeder calibration | 13 April, 2006

We have been using this new jig for almost a year now, and I can tell you, there is a big difference in our CP's performance before and after the use of the jig. We run a lot of 0402 and 0603 parts. Our downtime has decreased since the very first day we started to use it.

Regards.

Gpe.

reply »

#40983

Fuji CP feeder calibration | 14 April, 2006

Does the unit come with all of the master jigs and tapes, or do you have to purchase them seperate ?

reply »

____

#40988

Fuji CP feeder calibration | 14 April, 2006

Master Jigs and tape are separate. The "All in One" jig is around $12k just so you know.

reply »

Tom Scherer

#45967

Fuji CP feeder calibration | 4 December, 2006

HEllo, I was wondering if you have any information where I can obtain a used fuji feeder jig? I am looking for the simole one with no screens or anything, just the simple one.PLease advise??

Tom Scherer Control Products Inc. 763-213-3302

reply »

#45985

Fuji CP feeder calibration | 5 December, 2006

This is for CP6 feeders? What is the smallest componet run on this machine(0402,0603)?

reply »

#45987

Fuji CP feeder calibration | 5 December, 2006

CP643'S Will run 0201's

reply »

#45988

Fuji CP feeder calibration | 5 December, 2006

Let me rephrase my question.

Tom,

What is the smallest componet you are running on your machine?

reply »

#45989

Fuji CP feeder calibration | 5 December, 2006

0402

reply »

#46252

Fuji CP feeder calibration | 18 December, 2006

Does Fuji sell the "All in One" Jig?

JG

reply »

#46282

Fuji CP feeder calibration | 19 December, 2006

Alternative smt sell the best calibration unit on the market

reply »

#46295

Fuji CP feeder calibration | 20 December, 2006

Is there anyone out there using the Alternative SMT jig ?

http://www.alternativesmt.com/productdetail.asp?p_id=2

reply »

#46297

Fuji CP feeder calibration | 20 December, 2006

Another place to look at is SMT Research. http://www.smtresearch.com/feedercalibration.aspx

reply »

#46320

Fuji CP feeder calibration | 20 December, 2006

I think that in this day and age.....if you are not testing the feeder via some sort of indexing proceedure while the feeder is off of the machine.....you are simply not going to be certain the feeder is working properly.

The Alternative SMT jig does this. Perhaps there's others.

Any jig that simply uses some sort of microscope based alignment system as it's only method to check the feeder is very, very old technology that was designed in the days of the dinosours. Not good enough for todays technology IMO.

reply »

#46337

Fuji CP feeder calibration | 21 December, 2006

Here you go guys check this out Information on the Alternative Feeder Master

www.feedermaster.com

reply »

SMT Custom Nozzles

ii-feed SMT Intelligent Feeder