Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Views: 1740


MPM 3000 PROBLEM | 6 April, 2006

Any one familiar with a board clamp problem on MPM UP3000? The one I have will not clamp the board when program is running. It will work when toggled through the output diagnostics. Any help is appreciated.

reply »


MPM 3000 PROBLEM | 10 April, 2006

chech your board parameter menu under page 1. It may say something like board snugger or vaccum.

reply »

PCB machines

Used SMT machines