Chip capasitor plating

Subscribe to Thread

Hi guys.. I just want to know on what are common types of... - Jan 09, 2006 by

Hi, The ROHS compliant parts are usually Matte Tin on the... - Jan 10, 2006 by Rob

azbvc

#38897

Chip capasitor plating | 9 January, 2006

Hi guys..

I just want to know on what are common types of terminal plating on chip capasitor and does each plating will affect reflow profile?

Thank..

reply »

Rob

#38939

Chip capasitor plating | 10 January, 2006

Hi,

The ROHS compliant parts are usually Matte Tin on the outer terminal plating.

There are also 2 further types of metal on the average chip cap - the undercoat metal of the outer electrode & the inner electrode. These are usually the same & are normally classed as base metal (usually copper) or precious metal (silver palladium).

Regarding reflow profiles, I've not heard of any problems, however a chip cap is not a demanding part to solder. Most manufacturers have suggested solder profiles on their websites.

I have access to a database with all Rohm, Kemet & Murata caps on, so if you have a specific question on any of these manufacturers I'll take a look.

Rob.

reply »