Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


What golves do you use at the end of the reflow oven?

Views: 2051

SuMoTe

#37787

What golves do you use at the end of the reflow oven? | 10 November, 2005

I need a new set of gloves for my operators at the end of the reflow oven. MUST be ESD safe.

What do you use/recomend?

reply »

1st Article

#37791

What golves do you use at the end of the reflow oven? | 10 November, 2005

Sumote, I suggest DESCO ESD safe het gloves, these gloves have a polyester exterior fabric with woven conductive fibers to ensure static protection. Inner lining constructed of material for use in heat assembly processes, can with stand 200�F maximum. Hope this help.

reply »

1st Article

#37792

What golves do you use at the end of the reflow oven? | 10 November, 2005

Dear Sumote, I would suggest DESCO ESD safe heat gloves, we are using them at our facility, these gloves have a polyester exterior fabric with conductive fibers to ensure static protection. Inner lining constructed of material for use in heat of 200�F maximum. Hope this help.

reply »

Equipment Auction - Eagle Comtronics: Low-Use Electronic Assembly & Machining Facility 2019 Europlacer iineo + Placement Machine  Test & Inspection: Agilent | Tektronix | Mantis Machine Shop: Haas VF3 | Haas SL-20 | Mult. Lathes

Reflow Oven