Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Any Recommendations? Lead-Free Reflow Oven and Wave Machine

Views: 2404

SJ

#37628

Any Recommendations? Lead-Free Reflow Oven and Wave Machine | 3 November, 2005

We are a small-medium size CM and are looking to convert to Lead-free.

Any recommendations for good (Price, Quality, Throughput) Reflow Ovens and Wave Machines for Lead-free will be greatly appreciated!

This message was posted via the Electronics Forum @

reply »

#37629

Any Recommendations? Lead-Free Reflow Oven and Wave Machine | 3 November, 2005

Any decent 7-zone reflow oven rated at 300 degrees C will handle lead free. Prices for used ovens in this range begin around $15K. For waves, the prices are all over the map. Send me a private e-mail and I'll introduce you to a friend of mine who sells brand new lead-free waves in the $75K range.

Rick fastek@comcast.net

reply »


Mo

#37655

Any Recommendations? Lead-Free Reflow Oven and Wave Machine | 4 November, 2005

SJ,

Let me know if you need any assistacne in financing these machines. We are a bank-owned direct financing source and we specialize in electronic manufacturing equipment. Even if you have a financing company/bank that you always use it never hurts to bring in a little competition and keep them on their toes. I hope you find a great deal on those machines and I hope that I can be of service.

Sincerely,

Mo Tavackoli Business Development Manager PlainsCapital Leasing Ph: 214-775-4618 mtavackoli@plainscapital.com

www.plainscapital.com

reply »

BK

#37656

Any Recommendations? Lead-Free Reflow Oven and Wave Machine | 4 November, 2005

There are various China made oven which can do the job.

Price for Reflow oven is about USD35K and Wave soldering is about USD55K.

If you need more info, please contact us.

BK Email : sales@hynergy.com.sg

reply »

#37676

Any Recommendations? Lead-Free Reflow Oven and Wave Machine | 6 November, 2005

Hi,

We have been running Soltec reflow and wave, and are very happy with them. The software on the Soltec oven is great, but a bit stupid on the wave. However they are both great units, and after about 38,000 PCB's they are still totally clean with no hint of residue.

Regards,

Grant

reply »

fluid dispensers

Reflow Oven