Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


PCB Prototyping SSB / DSB


PCI

#35263

PCB Prototyping SSB / DSB | 1 July, 2005

Hello I am looking for a best solution to make a prototype of Single sided and double sided board. Using Orcad. The line / track width are 8/8 mil. the hole sizes are 0.6 0.8 , 1.2 and 2.6 mm. The size will be approx. 175 x 130mm. Could you please suggest me the best system . My future concern will be multilayer up to 6 layer. Thanks

reply »


PCI

#35417

PCB Prototyping SSB / DSB | 11 July, 2005

thanks . i want to make prototpe pcb in house. thus talking about the best system available for making the prototype. can you pls suggest?

reply »

#35418

PCB Prototyping SSB / DSB | 11 July, 2005

Approaches are: * PCDATAK sells [through distributors and hobbist sites] inexpensive layout software and plastic sheets that you run through a copier and then use to image the traces on the bare board. Since you have the software, all you need is the plastic sheets. * LPKF [ http://www.lpkf.com ] provides a wide range of materials and equipment used in rapid prototyping.

reply »

See Your 2024 IPC Certification Training Schedule for Eptac

One stop service for all SMT and PCB needs