Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


X-Ray Recommendations

#34311

X-Ray Recommendations | 18 May, 2005

Hi,

We place BGA, but until now have not used X-Ray inspection, and it would be a good thing to have. Can anyone recommend a low cost X-Ray that would get us by. We don't need something fast, but it should be able to show us clearly voids etc.

Regards,

Grant

reply »


Rob

#34314

X-Ray Recommendations | 18 May, 2005

There is a reasonably cheap tool called an Ersascope some of our customers swear by.

The link is: http://www.ersa.de/en/

You don't get all the issues with radioactive sources then either.

Never personally used it as we had xray, but I've heard a lot of good feedback on them.

Rob.

reply »

#34321

X-Ray Recommendations | 18 May, 2005


RDR

#34322

X-Ray Recommendations | 18 May, 2005

Check out Glenbrook technologies

reply »

jdumont

#34323

X-Ray Recommendations | 18 May, 2005

I agree with Russ, check Glenbrook out. We ended up getting a VJ Electronix 1500 but I was pushing for the Glenbrook.

reply »

py

#34344

X-Ray Recommendations | 19 May, 2005

we have a VJ Electronics 1000 LP not bad..

This message was posted via the Electronics Forum @

reply »

#34345

X-Ray Recommendations | 19 May, 2005

Glenbrook is the best if you are looking for a low cost unit. I had sold numbers of this units in Asia and customers are so please with it. If you need to check the voids and have the data, an option of GTI-5000 software needed. Send an email to me and I can explain more to you.

Regards Danny hui

reply »

LUPO

#34354

X-Ray Recommendations | 19 May, 2005

HI,

www.phoenix-xray.com look for bench|mate. I think Ersascope is not powerfull tool for BGA.

Good luck!

reply »

Jade Series Selective Soldering Machines

Conductive Adhesive & Non-Conductive Adhesive Dispensing