DEK 265 and FUJI Board Loader

Subscribe to Thread

I have a DEK 265LT screen printer and a Fuji bare board load... - Nov 29, 2004 by bobsavenger

You probably have already done this... but you need to enter... - Dec 06, 2004 by Don

I have the same problem but an MPM downstream of the Fuji. I... - Dec 06, 2004 by Paul pmd

I think I have schematics for a Fuji loader here. Let me kno... - Dec 07, 2004 by Don

bobsavenger

#31513

DEK 265 and FUJI Board Loader | 29 November, 2004

I have a DEK 265LT screen printer and a Fuji bare board loader. I cannot get the two machines to talk through the SMEMA cable. I have the personality card for the DEK and I have the correct cable for a FUJI machine.

Is there something that I needed to do when I installed the Fuji personality card into my DEK? Please help.

Thanks Bob Leible

reply »

Don

#31573

DEK 265 and FUJI Board Loader | 6 December, 2004

You probably have already done this... but you need to enter the maintenance program with the maintenance key, select "Set Prefs" scroll down to "Upline Machine" and enter "Fuji".

reply »

Paul pmd

#31577

DEK 265 and FUJI Board Loader | 6 December, 2004

I have the same problem but an MPM downstream of the Fuji. Im looking for schematics for this Fuji. Before we had another machine hooked to this Fuji and the output switch needed to be set to latch. Otherwise only a pulse was seen and it was not long enough for the FuJi to recognise.

reply »

Don

#31580

DEK 265 and FUJI Board Loader | 7 December, 2004

I think I have schematics for a Fuji loader here. Let me know if you want me to scan & email or fax some pages.

reply »