Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

Moisture sensitive device re-packaging

We currently are supplied parts that are moisture sensitive ... - Aug 11, 2004 by via

Hello, Try Ameri-Vac at 619-498-8227. I have looked at se... - Aug 11, 2004 by via

You could try the manual impulse sealer machine and purge wi... - Aug 11, 2004 by Dummy  

Hi, You might find you also need an oven & dessicant for ... - Aug 17, 2004 by Rob  

Richard Evans

#29994

Moisture sensitive device re-packaging | 11 August, 2004

We currently are supplied parts that are moisture sensitive that have high MOQ's even though product volumes are low. These devices are heat sealed by the manufacturer but we have no method to re-seal the packaging to protect the remaning items from moisture ingress. Can anyone recommend a re-sealing system?

This message was posted via the Electronics Forum @

reply »

Deon Nungaray

#29995

Moisture sensitive device re-packaging | 11 August, 2004

Hello,

Try Ameri-Vac at 619-498-8227. I have looked at several systems an found they have good price-to-performance systems.

Regards,

Deon Nungaray deonn@generalmonitors.com

This message was posted via the Electronics Forum @

reply »

Dummy

#29997

Moisture sensitive device re-packaging | 11 August, 2004

You could try the manual impulse sealer machine and purge with Nitrogen gas if feasible. The price tag is less than 100.00

http://www.uline.com/Browse_Listing_2253.asp

reply »


Rob

#30078

Moisture sensitive device re-packaging | 17 August, 2004

Hi,

You might find you also need an oven & dessicant for the re-sealing & re-baking process.

We found a couple of second hand Gallenkamp ovens (appear to be well made) & a Komet 20 vaccuum sealer for this.

Also those natty little cards that change colour with moisture are helpful.

Cheers,

Rob.

reply »

SMT spare parts - Qinyi Electronics
One stop service for all SMT and PCB needs
Now Online
55
Visitors
0
Member

Who are SMTnet visitors?

Become a member now and receive the value and benefits of membership.

Solder Paste Dispensing
thru hole soldering and selective soldering needs
pcb fluid dispensers

Facility Closure