Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Glue Bubbles

Marco Serrano

#27953

Glue Bubbles | 7 April, 2004

Had anyone experienced air bubbles inside of the Loctite glue syringes? If any of you do What have you done to rid off this problem? Thanks in advance!

reply »

Paul

#27954

Glue Bubbles | 7 April, 2004

The easiest way to remove air bubbles from any fluid is to place it into a vacuum chamber. I do this almost daily with liquid rubber coatings, glues, and plastics.

reply »

#27968

Glue Bubbles | 8 April, 2004

We typically store the tubes straight up and down. This seemed to help with the air pocket problem. Did not solve it 100 percent. best bet is still vacum.

reply »

ICT Total SMT line Provider

Reflow Oven