Fuji Flexa

Subscribe to Thread

Hello all, We are considering switching from FujiCam to... - Oct 14, 2003 by Sr. Tech

I strongly reconmend to switch over to Flexa. It's much easi... - Oct 15, 2003 by

We are also curently considering Flexa and would like any re... - Jan 02, 2004 by Tech

In reference to item #1: You may be interested in a string o... - Apr 14, 2004 by heatherc

Sr. Tech

#26042

Fuji Flexa | 14 October, 2003

Hello all,

We are considering switching from FujiCam to Flexa. Does anyone have any comment on this? Advantages/Disadvantages?

Thanks

reply »

William Guatemala

#26062

Fuji Flexa | 15 October, 2003

I strongly reconmend to switch over to Flexa. It's much easier and reliable than FujiCam and UniCam. Except the PCB's have to be very roboust to handle all the security fixtures.

W. G

reply »

Tech

#26757

Fuji Flexa | 2 January, 2004

We are also curently considering Flexa and would like any real world info. 1: has anyone had experience with flexa with/without the Aegis software? 2: Are the graphics as easily editted as Fujicam? 3: Is it easier to set the access to menus/options than Fujicam? 4: Do they still use the global/ local setup that is in Fujicam? For the answers to these and any others you think we should consider I thank you in advance. By the way what security fixtures?

reply »

heatherc

#28071

Fuji Flexa | 14 April, 2004

In reference to item #1: You may be interested in a string of postings on this same subject entitled "Fuji Flexa and Aegis w/ Circuitcam or Unicam w/Assembly Expert" on this site.

Since that string is active still you may want to post your questions there also.

reply »