Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


SMT Process FMEA

P. J. O'Connor

#3454

SMT Process FMEA | 26 July, 2000

We are developing a SMT Process FMEA as part of a "Green Belt/Six Sigma" project. We have searched the web and not found anything that is specifically helpful.

Does anyone have a guideline or similar document they might be willing to share?

reply »


JAX

#3455

Re: SMT Process FMEA | 26 July, 2000

P.J., If you are just looking for info try the link below. If you want someone to help you implement the process inside your company you need to get a consultant. You might be able to find a couple hundred on this sight????

That's just my opinion, I could be wrong!!!

reply »

Brian W.

#3456

Re: SMT Process FMEA | 31 July, 2000

PJ, Have you already done your process cause and effect diagram? That is the step that allows you to define your PFMEA. I went throught six sigma training with one of my customers, and they used Air Academy Press out of Colorado Springs for their training. If you need a process cause and effect for SMT e-mail me and I will send you mine.

Good Luck, Brian W.

reply »

IPC Training & Certification - Blackfox

Reflow Oven