BGA's Reworks

Subscribe to Thread

To remove or Place a BGA in a BGA reworks machine , do I hav... - Mar 26, 2003 by

If you are applying paste, you should duplicate the profile ... - Mar 26, 2003 by RDR

Ren�: Look here to get started with you efforts: ... - Mar 26, 2003 by davef

Glad to know this information , looks excelent to me. Tks... - Mar 26, 2003 by

Ren�

#23925

BGA's Reworks | 26 March, 2003

To remove or Place a BGA in a BGA reworks machine , do I have to do a same profile as a normal Oven ( around 4.5 mins to Peak time ) or the conditions are only to get temperature needed to Solder or Remove ( no matters Time).

reply »

RDR

#23926

BGA's Reworks | 26 March, 2003

If you are applying paste, you should duplicate the profile recommended by the paste manufacturer. If you are applying flux only than you need to ensure that you do not exceed max temp and/or ramp-rates such as <= 3 deg. C/sec.

Russ

reply »

davef

#23927

BGA's Reworks | 26 March, 2003

Ren�: Look here to get started with you efforts: http://developer.intel.com/design/Quality/component/rework.htm

reply »

Ren� Sandoval

#23928

BGA's Reworks | 26 March, 2003

Glad to know this information , looks excelent to me.

Tks Ren�