how cp642 identify the melf1.3 & 1.3 nozzle

Subscribe to Thread

we will use melf nozzle , we want to know how to setting the... - Aug 21, 2002 by

Specify the nozzle size as 1.4 in both the nozzle allocation... - Aug 22, 2002 by Mark J

thank you , Mark thank you so much ... - Aug 22, 2002 by

you're welcome. if you have any other questions you can e-ma... - Aug 22, 2002 by Mark J

chao liang

#21278

how cp642 identify the melf1.3 & 1.3 nozzle | 21 August, 2002

we will use melf nozzle , we want to know how to setting the part data (or other item in f4g ), so the machine (cp642) can identify it from the nomal 1.3nozzle . thanks

This message was posted via the Electronics Forum @

reply »

Mark J

#21281

how cp642 identify the melf1.3 & 1.3 nozzle | 22 August, 2002

Specify the nozzle size as 1.4 in both the nozzle allocation table and the PD, the nozzles will still pass center test as the size variation is still within tolerence.

reply »

chao liang

#21293

how cp642 identify the melf1.3 & 1.3 nozzle | 22 August, 2002

thank you , Mark thank you so much

This message was posted via the Electronics Forum @

reply »

Mark J

#21298

how cp642 identify the melf1.3 & 1.3 nozzle | 22 August, 2002

you're welcome. if you have any other questions you can e-mail me, my address here is mjabure@smtnet.com. Used to be a machine instructor for fuji.

reply »