Specialty SMT Feeder

I am in need of feeder that that will feed a 76mm wide tape @ a 60mm pitch to be used on a Universal GSM. It is not a standard tractor feed, so it would require quite a bit of ingenuity. Does anyone out there know of someone who designs and builds custom SMT feeders. I already know of Hover-Davis. Thanks for any and all help given.

reply »

| I am in need of feeder that that will feed a 76mm wide tape @ a 60mm pitch to be used on a Universal GSM. | It is not a standard tractor feed, so it would require quite a bit of ingenuity. | Does anyone out there know of someone who designs and builds custom SMT feeders. | I already know of Hover-Davis. | Thanks for any and all help given. | If you already have a 72mm wide tape feeder from hoover davis what you might want to think about is extending the sprocket to accept a 76mm wide tape. Since it would be hoover davis you could still get the pitch you desire. If you have any feeder maintanance books from universal or hoover-davis you should have enough to get started. I have done this for different circumstances and have been able to run, even though the best choice would still be to get a custom feeder made by hoover-davis themselves.

reply »

| I am in need of feeder that that will feed a 76mm wide tape @ a 60mm pitch to be used on a Universal GSM. | It is not a standard tractor feed, so it would require quite a bit of ingenuity. | Does anyone out there know of someone who designs and builds custom SMT feeders. | I already know of Hover-Davis. | Thanks for any and all help given. | I could possibly help you with your feeder design. If you already have some existing hardware which could be modified you may want to contact Delaware Technology at 609 2358454.

reply »

| I am in need of feeder that that will feed a 76mm wide tape @ a 60mm pitch to be used on a Universal GSM. | It is not a standard tractor feed, so it would require quite a bit of ingenuity. | Does anyone out there know of someone who designs and builds custom SMT feeders. | I already know of Hover-Davis. | Thanks for any and all help given. | Phil, Try Robodyne Corporation in Minneapolis, they helped me out with some custom feeders for a GSM. Mike

reply »

| I am in need of feeder that that will feed a 76mm wide tape @ a 60mm pitch to be used on a Universal GSM. | It is not a standard tractor feed, so it would require quite a bit of ingenuity. | Does anyone out there know of someone who designs and builds custom SMT feeders. | I already know of Hover-Davis. | Thanks for any and all help given.

You might give GPAX a holler-- Columbus, OH 201-670-4143

Good luck!

reply »