Universal NCC8 head

Can anyone give me information about a NCC8 (?) head for the Universal GSM's. Thats the one w/ four spindles and onboard vision (not flex jet however). Are there any maintenance issues with this style head? Is the onboard camera system accurate? How easy is the calibration procedure? I understand the operators must change nozzles by hand. How difficult is it to do this? I am considering putting a NCC8 head on the back side of the Flex2 head that is currently on the GSM. One beam, two heads. Does this present any problems? Any other tidbits of information is appreciated. Thanks in advance, Scott Birnbaum

reply »

| Can anyone give me information about a NCC8 (?) head for the Universal GSM's. Thats the one w/ four spindles and onboard vision (not flex jet however). Are there any maintenance issues with this style head? Is the onboard camera system accurate? How easy is the calibration procedure? I understand the operators must change nozzles by hand. How difficult is it to do this? I am considering putting a NCC8 head on the back side of the Flex2 head that is currently on the GSM. One beam, two heads. Does this present any problems? Any other tidbits of information is appreciated. | Thanks in advance, | Scott Birnbaum | |

:( It sounds like your trying to increase machine capacity by modifying an existing machine. Why not consider adding another chip shooter to your line?

reply »