Solder Paste Inspection

Hello,

I am currently looking for a solder paste height inspection system (preferably one that will go in-line).

Can anyone reccommend any?

Thanks Steve

reply »

| | Hello, | | I am currently looking for a solder paste height inspection system (preferably one that will go in-line). | | Can anyone reccommend any? | | Thanks | Steve | I just arrived last week and what should appear. All six lines with DEK printers coupled to SVS solder paste inspection systems and QCCALC software. Nearly a money well spent dream come true - at least for BGA and ultra fine pitch devices.

I'll keep you posted.

Earl Moon

reply »

| | Hello, | | I am currently looking for a solder paste height inspection system (preferably one that will go in-line). | | Can anyone reccommend any? | | Thanks | Steve | Steve, Cybersentry makes an easy to program model that can be fitted in-line. Other than that you might want to try Phillips!

Hope this helps,

reply »

| | | | Hello, | | | | I am currently looking for a solder paste height inspection system (preferably one that will go in-line). | | | | Can anyone reccommend any? | | | | Thanks | | Steve | | | Steve, | Cybersentry makes an easy to program model that can be fitted in-line. Other than that you might want to try Phillips! | | Hope this helps, | I agree. I have used the cybersentry, and it is easy to program, goes in line, allows multiple types of sampling of boards, and operators generally like it. It allows you to look at every board, a specific sample size (like every 5th), or to set up multiple scripts so you can sample the boards, and eventually wind up checking every pad on the board when the sample is finished.

Brian

reply »