Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


  • SMTnet
  • »
  • Electronics Forum
  • »
  • AFTER CONFORMAL COATING ,THE PCB CAN BE RELOWED 230 DEG C PEAK AGAIN. IT IS ADVISABLE

AFTER CONFORMAL COATING ,THE PCB CAN BE RELOWED 230 DEG C PEAK AGAIN. IT IS ADVISABLE

Views: 1414

#80577

AFTER CONFORMAL COATING ,THE PCB CAN BE RELOWED 230 DEG C PEAK AGAIN. IT IS ADVISABLE | 18 June, 2018

Hi,We are in RFµwave assembler and one the customer requirement need conformal coating cover the chipcomponent metalisation solder fillet. We made as per customer requirment and ship the parts to customer. Again the customer do pick & place our component then refloed max peak 230 Deg c. Our questien is after conformal coating the units exposed reflow any possiblity to damge the conformal coatig while doing reflow again. ThanksKswamy

reply »

#80580

AFTER CONFORMAL COATING ,THE PCB CAN BE RELOWED 230 DEG C PEAK AGAIN. IT IS ADVISABLE | 18 June, 2018

That's a reasonable question for a supplier to ask his / her customer.

It depends ...

It depends on the materials use in the process the assembly and the reflow temperature recipe

reply »

  • SMTnet
  • »
  • Electronics Forum
  • »
  • AFTER CONFORMAL COATING ,THE PCB CAN BE RELOWED 230 DEG C PEAK AGAIN. IT IS ADVISABLE
used pcb assembly equipment - lel semi

Fast PCB Assembly