Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Juki 740 head calibration jig?

Views: 4283

#80519

Juki 740 head calibration jig? | 7 June, 2018

Hello,

I have a Juki KE 740 pick and place machine which i purchased used about 1 year ago. I am trying to run the self calibration feature which measures the offset of the placement heads to the camera on the group head. According to the manual some sort of jig with 2 holes in it is required but i cant find much info about this jig...

Does anyone have experience with this jig? know where to get one? I would love to even just see a picture of one to know what im looking for (:

thanks!

s

reply »

#80528

Juki 740 head calibration jig? | 9 June, 2018

It is Juki CAL PIECE A E3622721000 calibration jig. It is also necessary to have 508 nozzle in ATC.

Attachments:

reply »

#80571

Juki 740 head calibration jig? | 17 June, 2018

excellent, thank you. I have one coming in the mail now so we will see if this helps with my problem.

reply »

#80572

Juki 740 head calibration jig? | 17 June, 2018

Nice! Place it in jig holder larger holes upward and start calibration. This calibration block is only for the laser heads. Calibration block E5190729000(white dot in the middle of the block) is also for the camera.

reply »

SMT Custom Nozzles

Manufacturing Software