Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Intermittent vacuum on Hydra pipe

Views: 1101

#79635

Intermittent vacuum on Hydra pipe | 19 January, 2018

MYDATA MY9E: Hydra's pipe can't stop the vacuum during assembly. The problem ocurre just in only one pipe, the number 5. The tool picks components but doesn't drop it. Can the problem be in the unit vacuum?

reply »

#79637

Intermittent vacuum on Hydra pipe | 19 January, 2018

It should be one of these latches that got stuck in position. I had a similar problem(my200 machine) the other way around - my stays closed so I don't get any vacuum. The problem is that the whole block of latches should be replaced(on a my200 machine)

reply »

#79638

Intermittent vacuum on Hydra pipe | 19 January, 2018

Our supplier said the same. I thought it could be anything more simple. Anyway, he will send me another block to replace and see if works. Thank you for answer.

reply »

#79639

Intermittent vacuum on Hydra pipe | 19 January, 2018

In my opinion save the old block and see how hard is to replace one if you have problems in future. I suppose it will be fixable.

reply »

fluid dispensing pumps for integration

SMT in-printer dispensing