Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


AOI for through-hole?

Views: 1806

#78180

AOI for through-hole? | 10 July, 2017

Is anyone using an AOI machine for through-hole checking? We have a need to check post-build on some PCBs', but there doesn't seem to be any obvious AOI solution.

Is there such a beast available?

reply »

#78181

AOI for through-hole? | 10 July, 2017

You need to find a machine that has a camera with adjustable focal height.

Fixed cameras can inspect most smt components but soon reach their limits when it comes to inspecting taller components like thru hole.

Yes, there are many AOI machines out there that will inspect thru hole components.

With the right machine you can inspect thru hole/smt/hardware/labels/bare boards/ink stamping

Good luck

reply »

#78182

AOI for through-hole? | 10 July, 2017

We use a Mirtec MV-3L for SMT work, but now have a requirement for inspecting through hole boards. I am aware of many of the AOI machines for SMT work, but can't seem to find anything for through hole from a major (well-known) manufacturer.

Any useful suggestions as to maker, which is available in the UK?

reply »

#78186

AOI for through-hole? | 10 July, 2017

http://www.parmi.com/parmi/eng

PARMI

I have over 25 years working with Mirtec/OMRON/YESTECH/Agilent aoi and I have no affiliation with any manufacturer

reply »

#78204

AOI for through-hole? | 11 July, 2017

You should check Quins if you are looking low-cost system for component placement inspection and simple solder inspection.

reply »

#78422

AOI for through-hole? | 17 July, 2017

We use Omron RNS AOI's for PTH inspection. I believe Koh Young and Omron both have 3D PTH inspection now as well.

reply »

Training Services