Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Tyco QSP-2

Views: 1446

#77908

Tyco QSP-2 feeder Base problem | 23 June, 2017

Hello Please can someone help with a feeder Base Issue

I get the message " Warning Base Manager 2 Runtime '7e' Error Wrong Message Parameter " I have swapped the removable bases 1 & 2 over but the fault still lies with base manager 2

I will thank you in advance for any replies

Regards James

reply »

#77990

Tyco QSP-2 feeder Base problem | 26 June, 2017

So I am assuming that you are using the IQ feeders option on the machine. First thing I would check is to make sure you don't have an older feeder on the machine. There was a certain point where quad feeders would be 'IQ' capable or not. You may have an older feeder on the machine that is confusing the software.

good luck, Bob

reply »

See Your 2024 IPC Certification Training Schedule for Eptac

Global manufacturing solutions provider