Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Samsung CP40 Z height motor alarm detected Error Code 1523

Views: 3212

#77704

Samsung CP40 Z height motor alarm detected Error Code 1523 | 8 June, 2017

Hoping to get help on our Samsung CP40. We are trying figure out what part to replace for a Z height motor alarm detected Error Code 1523. Originally Head 1 was having this error. Swapped out I/O board and Z-Axis control for head one and same error still. Tore head 1 apart and tested all parts and they worked. Moved entire head 1 assembly to head 3 & head 3 to head 1. Now head 3 has same issue. I think it is a mechanical issue of some sort because head 3 goes up higher then the other two heads when the machine tries to home itself when fist powered on. If anyone has any advice it would be most appreciated. Thanks!

reply »

#77705

Samsung CP40 Z height motor alarm detected Error Code 1523 | 9 June, 2017

it sounds to me like a home sensor. try adjusting sensitivity if possible. move head manually to determine position at which home sensor is activated

reply »

#77714

Samsung CP40 Z height motor alarm detected Error Code 1523 | 12 June, 2017

Sounds to me like the z-encoder could be a problem. I cant remember but you may be able to disable a head in the system settings.

Bob

reply »

#77717

Samsung CP40 Z height motor alarm detected Error Code 1523 | 12 June, 2017

you can not just take the motor off and change it. the motors have a home pulse singnial. the motor has to be in a certian position the home pulse position when the flag hits the sensor. When you remove the motor you have to mark the motor gear when the head is in the home postion.

reply »

#77891

Samsung CP40 Z height motor alarm detected Error Code 1523 | 21 June, 2017

Hi We had same issue with Head 2.if you find solution let me know as well. thanks

reply »

SMT Custom Nozzles

Universal GSM2 Feeders