Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Copy and Install DoS window based for Philips Topaz smt machine

Views: 2252


jin

#77478

Copy and Install DoS window based for Philips Topaz smt machine | 26 April, 2017

Hi guys, so we have 3 Philip Topaz smt machine at our work place. But 1 of them just got repaired and it needs to install the DOS windows or whatever Philip Topaz has originally.

So is there anyways we can copy the DOS windows or DOS based operating system from 1 of the other 2 Topaz machines and then install it to the 3rd one? thx.

reply »

#77483

Copy and Install DoS window based for Philips Topaz smt machine | 27 April, 2017

jin,

The answer is no. DOS has to be installed from distributive normally supplied with machine.

Hopefully, machine data has not been erased. If it has been erased, than machine will have to be recalibrated.

Regards, Pavel

reply »

#79488

Copy and Install DoS window based for Philips Topaz smt machine | 15 December, 2017

Hi Pavel it is possible to clone the hard disk topaz machine to replace it in the future crashed? how should I do to save the calibration data of the machine?

reply »

#79515

Copy and Install DoS window based for Philips Topaz smt machine | 22 December, 2017

Hi

ii is possible to clone a hard disk, but the calibration data must be backup first. if this not can, then the machine must be calibrated.

reply »

#79586

Copy and Install DoS window based for Philips Topaz smt machine | 9 January, 2018

Jin,

Cloning is possible, but the machine will have to be recalibrated since calibration data from running machine will be copied to failed one.

As to back ups. Are you able to get into engineering menu?

Regards

reply »

SMT Machines

PCB equipment