Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Mydata software

Views: 3395

#77353

Mydata software | 4 April, 2017

we have a My9 using 2.4.6B software. the auto teach for new components option is there when creating a new package. but when i select it, it wont work. does this mean i need a software upgrade or does this mean the auto teach was disabled? when i hit F5 it says "AUTOTEACH OPTION NOT AVAILABLE"

reply »

#77354

Mydata software | 4 April, 2017

Does your my9 have any cameras aside from the x wagon camera and hydra camera? I believe you need a camera aside from these 2 such as a line scan camera to be able to use the auto teach option.

reply »

#77358

Mydata software | 5 April, 2017

we have the x wagon one and the one at the far right only.

reply »

#77359

Mydata software | 5 April, 2017

the package should have nozzle(midas) and camera pre-selected(hydra camera will not work(try standard or high resolution). Odd shape recognition type will not use auto teach option(try chip, leaded, BGA.... )

reply »

Manufacturing Software

reflow oven profiler