Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Who ever seen the PCB rack (Magazine) cleaning machine ?

Views: 5978

#77332

Who ever seen the PCB rack (Magazine) cleaning machine ? | 30 March, 2017

I have a problem with some particle, dust and solder paste contaminate on PCB rack and need to clean up once a week by manual. Now looking for the equipment to do Inline cleaning with water jet & Hot air Dry concept. Not too big machine and concept like automatic car washing. If any one have other solution please help to share

reply »

#77365

Who ever seen the PCB rack (Magazine) cleaning machine ? | 7 April, 2017

I have never heard of anything like that. If their was something like that it would be in the tens of thoudands of dollors. I would look at the souce of the contamination and use the money to fix that.

reply »

#77401

Who ever seen the PCB rack (Magazine) cleaning machine ? | 13 April, 2017

Hello Nicky!

I do not know of an in-line cleaning solution, however I would take a look into the NIX America Magazine Cleaning Solution.

It is a batch process unit that somewhat resembles a large drying and washing machine combo.

I saw one at IPC APEX a few years ago. That might be a great place to start. Best of luck!

reply »

#77575

Who ever seen the PCB rack (Magazine) cleaning machine ? | 15 May, 2017

Thank you very much.

reply »


Rob

#77576

Who ever seen the PCB rack (Magazine) cleaning machine ? | 15 May, 2017

Hi Nicky,

Some of our Magazine racks can be dissasembled and break down flat. In theory they would then fit in a screen cleaner.

Rob.

reply »

#77608

Who ever seen the PCB rack (Magazine) cleaning machine ? | 20 May, 2017

PCB Cleaning

PCB equipment