Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Dek horizon 03 adding 2d vision?

Views: 970

#77061

Dek horizon 03 adding 2d vision? | 7 February, 2017

Looking to find out I can add 2D vision to this 2010 horizon printer......

reply »

#77205

Dek horizon 03 adding 2d vision? | 7 March, 2017

You can. It is an option from Dek and you can buy it. It is not as good as SPI, but if you don't want to check all pads it is okay.

reply »

#77208

Dek horizon 03 adding 2d vision? | 7 March, 2017

In most instances, it is cycle time prohibitive to use it to check the entire PCB. But you can use it to check critical areas. You can also set it up to check every 2nd, 3rd, 5th panel. (etc)

reply »

#77388

Dek horizon 03 adding 2d vision? | 11 April, 2017

I have yet to find anyone at DEK to talk to and purchase. I will use it on corners , edges and critical parts only . This is a simple matter of user feedback when the past roll is getting too small.

reply »

How FactoryLogix Helped Sparton Corp. Achieve Regulatory Compliance

BGA Rework Services