Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Scratches in Juki laser

Views: 2547

#76995

Scratches in Juki laser | 1 February, 2017

Has anyone had any success polishing scratches out of a Juki laser ? If so, how did you do it ?

Thanks in advance

reply »


Rob

#76996

Scratches in Juki laser | 1 February, 2017

We use a place in China that refurbs them cheaply, PM me and I'll send you the details. Did we have a little feeder crash by chance?

reply »

#76997

Scratches in Juki laser | 1 February, 2017

Hi Rob, Thanks for the response. I am not aware of any feeder crashes. We aren't real sure where the scratches came from. They do not appear to be too deep but are at the edge of acceptable. We are still up and running.

I don't think I am comfortable sending a laser (or anything) to China for refurb.

We do have some polishing capabilities in house, I was wondering if anyone ever attempted that.

reply »

#77394

Scratches in Juki laser | 11 April, 2017

> Hi Rob, Thanks for the response. I am not aware > of any feeder crashes. We aren't real sure where > the scratches came from. They do not appear to > be too deep but are at the edge of acceptable. We > are still up and running. > > I don't think I am > comfortable sending a laser (or anything) to > China for refurb. > > We do have some polishing > capabilities in house, I was wondering if anyone > ever attempted that.

> Hi Rob, Thanks for the response. I am not aware > of any feeder crashes. We aren't real sure where > the scratches came from. They do not appear to > be too deep but are at the edge of acceptable. We > are still up and running. > > I don't think I am > comfortable sending a laser (or anything) to > China for refurb. > > We do have some polishing > capabilities in house, I was wondering if anyone > ever attempted that.

Hello Sr. Tech, you have not tried to just remove the protective mica sometimes they get licked and just have to clean inside, but if you work please let me know, for some future accident greetings

reply »

#77537

Scratches in Juki laser | 5 May, 2017

Our company supply repair service for JUKI lasers, sorry for disturb you, may you need it in the future. Have a nice day.

Best Regards, Becky Su becky(at)hysmt(dot)cn

reply »

SMT Custom Nozzles

PCB equipment