printing problem on mydata machines

Subscribe to Thread

we have one dot matrix printer and i would like to connect i... - Jan 24, 2017 by erici

If you're lucky, that parameter can be unlocked using the pa... - Jan 26, 2017 by robgd3

It also could be that your user level that you are logged in... - Jan 26, 2017 by bruce

exit TPSys and type setPrinter ... - Jan 30, 2017 by .net

erici

#76927

printing problem on mydata machines | 24 January, 2017

we have one dot matrix printer and i would like to connect it to the TP9 machine. The parameters settings for printer is "protected" so i cannot assign the printere to the machine. How do i "unprotect" the parameter to allow me to make changes?

reply »

robgd3

#76940

printing problem on mydata machines | 26 January, 2017

If you're lucky, that parameter can be unlocked using the parameters password.

If you're unlucky, and it can't be changed using the password, that'll mean it's hardware protected. You'll need a new magic word from Mycronic to update it.

Cheers, ..rob

reply »

bruce

#76941

printing problem on mydata machines | 26 January, 2017

It also could be that your user level that you are logged in on may not have access to change parameters

reply »

.net

#76950

printing problem on mydata machines | 30 January, 2017

exit TPSys and type setPrinter

reply »