Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Yamaha YV100's passwords?

Views: 1746

#76874

Yamaha YV100's passwords? | 11 January, 2017

When the YV100 starts up if you press a key during its startup you can get it to ascreen where it asks for passwords..

How would you get the passwords from this

reply »


Rob

#76879

Yamaha YV100's passwords? | 13 January, 2017

> When the YV100 starts up if you press a key > during its startup you can get it to ascreen > where it asks for passwords.. > > How would you > get the passwords from this

Hi,

if you haven't changed them then I think it's "specialist" on VIOS. From manual:

Step 1 Shut down the VIOS and turn off power. Step 2 Turn on power and after a moment a screen will appear that the machine will start after 6 sec., press any key within 6 sec. after this message, to enter the "VIOS SOFTWARE UTILITY". Step 3 Enter the password "specialist" and the main menu of the "VIOS SOFTWARE UTILITY" will appear.

reply »

#77404

Yamaha YV100's passwords? | 14 April, 2017

> > When the YV100 starts up if you press a key > > during its startup you can get it to ascreen > > where it asks for passwords.. > > > How would you > get the passwords from this > Hi, > > if you haven't changed them then I think > it's "specialist" on VIOS. From manual: > > Step > 1 Shut down the VIOS and turn off power. Step 2 > Turn on power and after a moment a screen will > appear that the machine will start after 6 sec., > press any key within 6 sec. after this message, > to enter the "VIOS SOFTWARE UTILITY". Step 3 > Enter the password "specialist" and the main menu > of the "VIOS SOFTWARE UTILITY" will appear.

It is indeed that password. I had the numlock key on!!!

reply »

SMT Custom Nozzles

2-Part Mixing Pump