Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Reflow oven profile

Views: 2253

#76675

Reflow oven profile | 2 December, 2016

I want to do improvement in conversion time. We running small quantity board and frequently do conversion. we produce very simple board no BGA only resistor, capacitor, LED, IC and transistor. We are running same model top and bottom in 1 reflow oven. could i use top profile when reflow bottom? Since our program temperature setting for top and bottom same. Kindly please advise...

reply »

#76680

Reflow oven profile | 2 December, 2016

We successfully accomplish this on almost every product we have using our BTU Ovens.

reply »

#76859

Reflow oven profile | 9 January, 2017

It shouldn't be any issue if you measure the top reflow settings using bottom profile board & the results are OK.

To common the reflow profile, both bottom & top profile measurement are taken & analyzed.

This, too, can be applied, even for different boards.

reply »

Reflow Oven