Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Component Package Specs

#7901

Component Package Specs | 12 January, 2000

Does anyone know of a company that publishes a catalog (book or CD) that describes most SMT components by type. i.e. physical dimensions of a QFP 100

reply »


JAX

#7902

Re: Component Package Specs | 12 January, 2000

Doug, Jedec has this info. Here is a few for you to use. LENGTH, L+LEADS, WIDTH, W+LEADS, PITCH, AVG. HEIGHT. 1. CQFP100AC: 17.28,22.35,17.28,22.35,.635,4.92 2. CQFP100AF: 32.52,37.59,32.52,37.59,1.27,4.92 3. PQFP100AD: 19.05,22.35,19.05,22.35,.635,4.57 4. PQFP100AE: 19.05,22.35,19.05,22.35,.635,3.04 5. QFP100: 14.00,17.90,20.00,23.90,.650,3.40 7. MQFP100: 14.00,17.20,20.00,23.20,.650,3.15 8. TQFP100ADE:12.00,14.00,12.00,14.00,.400,1.20 9. TQFP100AED:14.00,16.00,14.00,16.00,.500,1.20 10.TQFP100AHA:14.00,16.00,20.00,22.00,.650,1.20 11.TQFP100BDE:12.00,14.00,12.00,14.00,.400,1.60 12.TQFP100BED:14.00,16.00,14.00,16.00,.500,1.60 13.TQFP100BHA:14.00,16.00,20.00,22.00,.650,1.60 14. FQFP100: 12.00,14.60,12.00,14.60,.400,2.45 15. FQFP100: 14.00,16.60,14.00,16.60,.500,2.45 That should help until you are able to set up your own parts spec. sheets! Have Fun, Jax

reply »

#7903

Re: Weebinjipped | 13 January, 2000

Hey JAX, where's 6?

reply »

#7904

Re: Component Package Specs | 13 January, 2000

Doug: JAX's advice on JDEC is good. Also, there's a bunch of stuff over on pcdmag.com. Ta. Dave F

reply »


JAX

#7905

Re: Weebinjipped | 13 January, 2000

Dave, I don't think your ready for #6. I have to ease you into the information so you don't hurt yourself!

reply »

#7906

Re: Weebinjipped | 13 January, 2000

JAX: Thanks bud, I've been known to hurt myself walking across a flat floor. Hell, I hurt myself in bed one time, er wazat someone hurt me in bed on time??? Can't remember. Dave

reply »


RDR

#7907

Re: Component Package Specs | 18 January, 2000

IPC 782 has package dimensions

Russ

reply »

Fluid Dispensing, Staking, TIM, Solder Paste

Manufacturing Software