Thermocouples for Reflow Profiling

Subscribe to Thread

Quick question for all you SMT Experts... Where do you buy ... - Jul 08, 2016 by A Very Frazzled Man

Ray Prasad says ... Information about thermocouples and vari... - Jul 10, 2016 by davef

Thanks Dave. I've bought them from Omega for years. (Signif... - Jul 11, 2016 by A Very Frazzled Man

We get them from Omega and have been for the past 20 years. ... - Jul 11, 2016 by SteveO

Measurement Specialties purchased RTD Company, Inc. [ ... - Jul 11, 2016 by davef

We're a high mix low/medium volume manufacturer. We are requ... - Jul 21, 2016 by tombstonesmt

A Very Frazzled Man

#75961

Thermocouples for Reflow Profiling | 8 July, 2016

Quick question for all you SMT Experts... Where do you buy your thermocouples for Reflow Profiling?

reply »

davef

#75965

Thermocouples for Reflow Profiling | 10 July, 2016

Ray Prasad says ... Information about thermocouples and various types of profilers are available from the following sources: • ECD ¾ profilers and thermocouples; (503) 659-6100 or http://www.ecd.com. • KIC ¾ profilers; (858) 673-6050 or http://www.kicthermal.com. • Datapaq ¾ profilers and thermocouples; (978) 988-9000 or http://www.datapaq.com. • Saunders Technology ¾ thermocouples; (603) 881-3330 or http://www.saunderstech.com. • Omega ¾ thermocouples and labels; (800) 222-2665 or http://www.omega.com.

reply »

A Very Frazzled Man

#75972

Thermocouples for Reflow Profiling | 11 July, 2016

Thanks Dave. I've bought them from Omega for years. (Significantly cheaper than buying from profiler manufacturers.) I was just wondering if others had found another source.

reply »

SteveO

#75973

Thermocouples for Reflow Profiling | 11 July, 2016

We get them from Omega and have been for the past 20 years. Tried "cheaper" TC's a few years ago from an Asian supplier and lets just say I learned my lesson. They started to short after about 5 cycles and were tossed. Stick with Omega!

reply »

davef

#75974

Thermocouples for Reflow Profiling | 11 July, 2016

Measurement Specialties purchased RTD Company, Inc. [ http://www.meas-spec.com/rtd-company.aspx ] in October 2012 and has maintained the primary site and staff in Minnesota. We continue to be a technological leader in the design and manufacture of engineered temperature sensors and probes used in motors, generators, medical, aerospace, OEM and industrial applications. You can contact us at +1 763-689-4870 or +1 800-899-9783 or sales.hmlk.us@meas-spec.com to place an order, inquire about our products, or get technical support.

reply »

tombstonesmt

#76040

Thermocouples for Reflow Profiling | 21 July, 2016

We're a high mix low/medium volume manufacturer. We are required to keep profile boards on hand with TC's still attached. Which led us to make our own in house. We use the welder below.. Very easy and much more affordable.

http://www.dcccorporation.com/hotspot.html

reply »