Intrusive Soldering

Subscribe to Thread

Hi All, I need to know all about intrusive soldering. A site... - Sep 03, 2015 by Milroy

Our friend Bob Willis talks about intrusive soldering. ... - Sep 03, 2015 by davef

SMTA is a good source of information. smta dot org Use the ... - Sep 04, 2015 by CAPSE

Hi, Thank you for the information. I have read his writings ... - Sep 05, 2015 by Milroy

The problem we ran into trying to do more intrusive reflow i... - Dec 03, 2015 by ProcEng1

Milroy

#74491

Intrusive Soldering | 3 September, 2015

Hi All, I need to know all about intrusive soldering. A site with all possible details about stencil design, paste printing for intrusive soldering and etc.. would be very helpful to me.

Thanking you in advance,

reply »

davef

#74494

Intrusive Soldering | 3 September, 2015

Our friend Bob Willis talks about intrusive soldering.

reply »

CAPSE

#74498

Intrusive Soldering | 4 September, 2015

SMTA is a good source of information. smta dot org Use the Publications tab and search for your topic. You'll access journal papers and conference proceedings.

reply »

Milroy

#74502

Intrusive Soldering | 5 September, 2015

Hi, Thank you for the information. I have read his writings about this topic.

reply »

ProcEng1

#75012

Intrusive Soldering | 3 December, 2015

The problem we ran into trying to do more intrusive reflow is that many of the TH parts could not withstand the temperatures for the reflow cycle.

Solder preforms that could be placed by the Pick and Place was one of the avenues I explored trying to get that going.

reply »