How to measure dimensions in gc prevue?

Subscribe to Thread

How to measure dimensions in gc prevue trial version? ... - Aug 03, 2015 by preeti

What positions do you need to measure? Pad to Pad or corner ... - Aug 03, 2015 by leeg

Hello, I can give you some information: 1. After uploading... - Aug 03, 2015 by Buckcho

Any dimensions.. it could be from pad to pad or board outli... - Aug 05, 2015 by preeti

could u please attach the snapshot for the same ... - Aug 05, 2015 by preeti

Hi, that's how it works: 1. Zoom to the object you wan... - Aug 05, 2015 by Evtimov

It is exactly how Mr. Evtimov wrote it, I forgot to mention ... - Aug 06, 2015 by Buckcho

preeti

#74317

How to measure dimensions in gc prevue? | 3 August, 2015

How to measure dimensions in gc prevue trial version?

reply »

leeg

#74318

How to measure dimensions in gc prevue? | 3 August, 2015

What positions do you need to measure? Pad to Pad or corner to corner?

reply »

Buckcho

#74319

How to measure dimensions in gc prevue? | 3 August, 2015

Hello, I can give you some information: 1. After uploading of the gerber you have to go to the firs point from where you have to measure and pres "S" if you want the center automatically. After that pres the "zero user" button so you can null there. http://www.photobox.co.uk/my/photo?album_id=3593011126&photo_id=20816380186#20816380250 2. Then go to the second point and if you want you can center it again. Then you can see the reading on the top-left. http://www.photobox.co.uk/my/photo?album_id=3593011126&photo_id=20816380186#20816380186 http://www.photobox.co.uk/my/photo?album_id=3593011126&photo_id=20816380186#20816380226

reply »

preeti

#74329

How to measure dimensions in gc prevue? | 5 August, 2015

Any dimensions.. it could be from pad to pad or board outline.

reply »

preeti

#74330

How to measure dimensions in gc prevue? | 5 August, 2015

could u please attach the snapshot for the same

reply »

Evtimov

#74331

How to measure dimensions in gc prevue? | 5 August, 2015

Hi,

that's how it works:

1. Zoom to the object you want to start with. 2. Click S to center to the object. Depending on the zoom you can center to pad, line, corner.... 3. Click Z(this zeroes your Relative coordinates). If you click Ctrl+z(this zeroes your absolute coordinates) 4. Hit Space 5. Go to second coordinate 6.Hit S to center and see your result from the measurment 7.Hit Space once will let the second point to be changed. Hit Space two times will let the first point go too.

reply »

Buckcho

#74338

How to measure dimensions in gc prevue? | 6 August, 2015

It is exactly how Mr. Evtimov wrote it, I forgot to mention the space button so you can stop the mouse.

reply »