DEK PRINTER 265

Subscribe to Thread

Hi all, I have an intermittent problem on a 265 GSX print... - May 16, 2013 by aj

Hej AJ, i think in my case it was a weak connection at a ... - May 16, 2013 by Tobi-AOI

Hi Tobi, Hopefully you are right, I was thinking the same... - May 16, 2013 by

This might be a cable. It is not broken all the way - that's... - May 16, 2013 by Evtimov

Check the wire for the breake i change that and conector plu... - May 20, 2013 by SMTVYS

All, I am glad to report that this issue has been resolve... - Oct 23, 2013 by aj

#68964

DEK PRINTER 265 | 16 May, 2013

Hi all,

I have an intermittent problem on a 265 GSX printer.

"Position error" on the rising table.. quite a lot of work has been done with no success. such as motor, break , encoder replaced....diagnostic checks etc....

Machine could run for a few days and then out of the blue the error occurs, takes a few power downs and download Mint files before we get going again...

The table rises in stages andthen error occurs...

Any advise appreciated.

reply »

Tobi-AOI

#68965

DEK PRINTER 265 | 16 May, 2013

Hej AJ,

i think in my case it was a weak connection at a light barrier.

Best regards Tobi

reply »

#68966

DEK PRINTER 265 | 16 May, 2013

Hi Tobi,

Hopefully you are right, I was thinking the same and I am currently waiting for a replacement on a suspect...

Thanks for reply,

AJ...

reply »

Evtimov

#68967

DEK PRINTER 265 | 16 May, 2013

This might be a cable. It is not broken all the way - that's why you don't get the error all the time. After it moves for awhile it will break the connection and you start getting the error.

reply »

SMTVYS

#69006

DEK PRINTER 265 | 20 May, 2013

Check the wire for the breake i change that and conector plug ont he breake is diferent and i have to change the wire, if you need more help contact me at vmaderoATsmtvys.com

reply »