Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Chip Die Damage

Views: 2904


MEO

#67718

Chip Die Damage | 3 December, 2012

Hi, Recently we have found a chip on a card having very small damage on the die corner. I would like to know if there are some industry standard criteria of acceptance available. If not, what would you recommend?

Attachments:

reply »


CPI

#67749

Chip Die Damage | 5 December, 2012

what type of part is this a micro BGA by chance? there is a mill spec (man I cant remember it right now), I'll get back to you! it provides acceptance criteria for chip/crack/gouges.... if it doesn’t expose the lead frame (inner workings of the device), if its a crack and it doesn't lead toward the inners or the lead/bump/ball(it starts on top and leads toward the component edge), you can see the end of the crack or chip,,,its acceptable (per this mil spec)

reply »


MEO

#67774

Chip Die Damage | 6 December, 2012

The package is flip chip BGA (FCBGA592) I found some info on leadless devices damages in IPC610 but it is not exactly what I am looking for.

reply »

#67781

Chip Die Damage | 7 December, 2012

Try MIL-STD-883 Method 2017

Die inspection service providers may be willing to help

Services, Die inspection * Amkor amkor.com * Syagrus Systems syagrussystems.com

SMTA has published a lot of papers that track to 'die' & 'inspection' but most often the paper relate to die attach and underfill, which is not where you're interested. But you might check there, something may pop-out to you.

reply »


CPI

#67788

Chip Die Damage | 7 December, 2012

Thats the one I was thinking of!! thanks Dave!

reply »

SMT spare parts - Qinyi Electronics