We are going to be moving some equipment around and our MY15 and TP11 will not fit through the door unless we take of the Y wagon. Does anyone know how to do this? If so could you please share with me.
Most of it depends upon the type of Y wagon you have. if they are internal conveyors you need to remove the covers from the operator side. There are 3 screws holding the Y wagon down, 2 of them are hex screws and the one in front is an allen head. When removing them make sure you have someone in the back o the machine holding the Y wagon so it does not fall. After removal of the screws and before moving the Y wagon there are 2 ribbon cables that you need to be aware of and unplug. Once you do that you can slide the wagon out and all is complete. Just a quick question: on the MY15 is it a linear Y wagon? let me know how you make out it is pretty simple and as the other guy said you will need to re-cal the machines (at least the place area and re-install all your tools)