Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

GSM 2 Spindle

Views: 1283

GSM 2 Spindle - 05-/10-12 by Mark  

GSM 2 Spindle - 05-/11-12 by PeteB  

GSM 2 Spindle - 05-/14-12 by AMK  


Mark

#66313

GSM 2 Spindle | 10 May, 2012

All Professional,

I've a GSM 2 flex head (2 beams). Beam 1, spindle 1 and 2 is disable right now. Spindle is not changing nozzle right now. How hard is it to replace the spindle? Does it involve calibration, and can anyone provide me with instruction.

Thank you all.
Mark

reply »


PeteB

#66326

GSM 2 Spindle | 11 May, 2012

Have you tried adjusting the spindle height? To do this you will need UIC fixture #46315501.

reply »


AMK

#66332

GSM 2 Spindle | 14 May, 2012

It's been a really long time since I worked on a GSM but we did have some spindle problems and it was the clutch that was not working properly. The head was removed from the machine and a special tool was needed to remove the clutch. A caibration was done when the head was put back on the gantry. Sorry for the lack of details but wanted to point out checking the clutch assembly.

reply »

SMT Chip Mounters
Now Online

296
Visitors

1
Members

Featured Companies
 

Electronic Testing, Semiconductor, SMT / PCB Auction