IP3 PLCC44 THETA SKEW

Subscribe to Thread

Hello every one! I need help with a misaligned theta at ... - Dec 06, 2011 by comando

When was the last time the backlight bulbs in the head were ... - Dec 07, 2011 by Sr. Tech

this bulbs never have been replaced but the image look ok I... - Dec 07, 2011 by comando

Just click on my name and you should be able to message me. ... - Dec 12, 2011 by Sr. Tech

Two things: * Consider a recent thread giving advice on sol... - Dec 12, 2011 by davef

comando

#65592

IP3 PLCC44 THETA SKEW | 6 December, 2011

Hello every one!

I need help with a misaligned theta at plcc44, the machine is a IP3 smd3, firmware 2.99, vision card 4400 and both camera type YD2048N on label but in Proper data is set 2 (I don't know if this is right) we use Fuji flexa, Back Lighting and vision type 100 P-Pattern no. 3 and Result 1 in display the trace look misalignment in referent to the component ,the problem is random. excuse for my English I'm Spanish native. any can help me?

reply »

Sr. Tech

#65602

IP3 PLCC44 THETA SKEW | 7 December, 2011

When was the last time the backlight bulbs in the head were replaced ?

reply »

comando

#65604

IP3 PLCC44 THETA SKEW | 7 December, 2011

this bulbs never have been replaced but the image look ok I would like send you a part placement image and i don't know how , if you want send me you e-mail to send the image

reply »

Sr. Tech

#65624

IP3 PLCC44 THETA SKEW | 12 December, 2011

Just click on my name and you should be able to message me.

reply »

davef

#65625

IP3 PLCC44 THETA SKEW | 12 December, 2011

Two things: * Consider a recent thread giving advice on solving placement problems: http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=65288

* On adding pictures to your posts: ** On your original post, select EDIT ** Select ATTACHMENTS ** Select NEW ATTACHMENT / BROWSE ** Select the picture that you'd like to attach ** Select OK ** Select POST

reply »