Mydata MY12 Hydra Theta error

Subscribe to Thread

Hi I have a problem with one of our MY12 machines, the ma... - Nov 15, 2011 by Supse

According to the message guide it just says that it's a erro... - Nov 16, 2011 by dontfeedphils

Thanks Phil But the belt and spring has been changed recent... - Nov 21, 2011 by Supse

Oh wow, I suppose that would fix it huh? That's too bad tha... - Nov 24, 2011 by dontfeedphils

Negative on the spares. Mydata wants the other head for core... - Nov 28, 2011 by Sr. Tech

Supse

#65455

Mydata MY12 Hydra Theta error | 15 November, 2011

I have a problem with one of our MY12 machines, the machine stops very often (approx. 10-20 times a day) writing the following error message : f-mot-msetdyn hydra theta/205(f-hrdw-3). We then have to reinitialize the machine to continue production. We have consulted Mydata, but have not yet recieved a usable solution. Does any of you know what could trigger this error? We have already changed all pcb's that could affect the hydra, with no effect.

Hoping for a good advice

reply »

dontfeedphils

#65464

Mydata MY12 Hydra Theta error | 16 November, 2011

According to the message guide it just says that it's a error telling you to initiate the Hydra Theta axis. I suppose the encoder for the hydra theta motor could be losing count and causing it to need to be re-initiated, or it could be something to do with one of the Motor controller cards in the bottom of the machine. Almost all of those cards are inter-changeable so you could swap the theta controller with another one and see if it makes a difference.

Do you know the last time the belt and spring for the hydra theta control was replaced? If it's been too long it can stretch out and cause problems as well. Hope this helps a little, let me know if anything helps.

-Phil

reply »

Supse

#65509

Mydata MY12 Hydra Theta error | 21 November, 2011

Thanks Phil But the belt and spring has been changed recently. Unfortunatly we couldn't wait any longer for a solution, so we had to go for a change of the hydra-unit. This seems to have solved the matter, but I had hoped for a less expensive solution.

reply »

dontfeedphils

#65523

Mydata MY12 Hydra Theta error | 24 November, 2011

Oh wow, I suppose that would fix it huh? That's too bad that the whole unit had to be replaced, but look on the bright side, you should have a decent amount of spare hydra parts now right? haha

reply »

Sr. Tech

#65544

Mydata MY12 Hydra Theta error | 28 November, 2011

Negative on the spares. Mydata wants the other head for core....

reply »