Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


SMT Rework

Sean

#6639

SMT Rework | 19 May, 2001

T.W.I.M.C. I am trying to located a copy, or at least the proper number, for the ISO standards on soldering, rework, and PCB wiring. I am about to start up a SMT solder rework class at work. I recall that when I worked for Solectron in Austin, Tx. we had a copy of this book to refer to. It had beautiful color illustrations and photos as well as the ISO standards. I was hoping that someone at you publication or on the forum could help me find this publication. Thank you, Sean FitzPatrick

reply »

#6643

SMT Rework | 21 May, 2001

Sean,

Are you sure that you don't mean IPC instead of ISO? If so, the the IPC-A-610 is what you are looking for. If you are doing soldering rework, then look at the ANSI/J-STD-001 too.

Larry

reply »

#6650

SMT Rework | 21 May, 2001

We agree with LarryK, the previous poster. We know of no such ISO document, either. ISO can be found at: http://www.iso.ch/iso/en/ISOOnline.openerpage. ISO should be able confirm our thinking. Continuing: (1) Please get back to us if you find such a document. (2) Consider contacting the folk at your previous employer and confirming the document you seek.

We agree that IPC produces many wonderfully illustrated documents, but we�re wondering if either of the following might not be more appropriate: * 7711 - Rework of Electronic Assemblies * 7721 - Repair & Modification of Printed Boards & Electronic Assemblies

Finally, the International Electrotechnical Commission [http://www.iec.ch/] has taken to xeroxing and renumbering IPC documents. We wonder if that might be the source you seek.

reply »

SF

#6907

SMT Rework | 15 June, 2001

Just wanted to thank you for your imput. It was the very thing I was looking for. Sean

reply »

ICT Total SMT line Provider

See Your 2024 IPC Certification Training Schedule for Eptac