Automatic Board Support Systems

Subscribe to Thread

Okay, I tried searching the fine SMTnet Archives on this and... - Aug 05, 2010 by A Very Frazzled Man

We use Gridlock systems in our screen print machines they se... - Aug 10, 2010 by Bryan

We are using the Red-E-Set supports from Production solution... - Aug 10, 2010 by Kevslatvin

A Very Frazzled Man

#62392

Automatic Board Support Systems | 5 August, 2010

Okay, I tried searching the fine SMTnet Archives on this and I don't see anything newer than five years old, so I thought I'd try and get a modern take on the Grid Lok, Gel Flex, and Vacunest Board Support Systems. Who is using what, and do l You like it?

reply »

Bryan

#62410

Automatic Board Support Systems | 10 August, 2010

We use Gridlock systems in our screen print machines they seem to work well enough with no problems atall

reply »

Kevslatvin

#62415

Automatic Board Support Systems | 10 August, 2010

We are using the Red-E-Set supports from Production solutions in our Opal P&P machines and MPM SPM printer. Ours are the manual system though, they do have an automatic system. With theirs once you set them at the setup of the job you don't have to touch them again until you setup for the next job. I can't remember right off hand but I think they were quite abit cheaper than the Grid-locs.

reply »