How do you prove IPC-A-610 compliance to a federal agency?

Subscribe to Thread

Wondering if anyone has ever had to prove IPC-a-610 complian... - Jul 09, 2010 by jamyboy

There is no such thing as "IPCA610 compliance". The correct ... - Jul 09, 2010 by reworkexchange

Thank you for the response quite helpful.. ... - Jul 12, 2010 by jamyboy

jamyboy

#62213

How do you prove IPC-A-610 compliance to a federal agency? | 9 July, 2010

Wondering if anyone has ever had to prove IPC-a-610 compliance to a Federal Agency (Not DOD)? If so how did you accomplish it and what was the Federal Agency's response after sending Proof of Compliance? Thank you in Advance

reply »

reworkexchange

#62221

How do you prove IPC-A-610 compliance to a federal agency? | 9 July, 2010

There is no such thing as "IPCA610 compliance". The correct way of looking at this that the boards were inspected to IPC Class I, II or III Revision XX (current Rev is "E") and met all of the criteria.

From a commercial standpoint it would greatly substantiate your case if you put in a CofC signed by somehwat currently certified to IPC CIS or CIT and state their certification number and expiration date).

the other way some clients work this issue is to have a 3rd party referee the inspection (if there are issues).

The inspection criteria should always be defined upfront!

Good Luck

Bob Wettermann IPCA610- CIT

reply »

jamyboy

#62232

How do you prove IPC-A-610 compliance to a federal agency? | 12 July, 2010

Thank you for the response quite helpful..

reply »