Reflow Oven with Vacuum System

Subscribe to Thread

Has anyone here specially the Gurus heard, used or seen a Re... - May 24, 2010 by smt_guy

i'm really intrested in that as well, because we are having ... - May 25, 2010 by Sibbe

Vacuum Soldering is mostly available with Vapor Phase Solder... - May 25, 2010 by josh

We have been doing pilot runs with vacuum installed on vapor... - Jun 09, 2010 by RuggedSMT

smt_guy

#61914

Reflow Oven with Vacuum System | 24 May, 2010

Has anyone here specially the Gurus heard, used or seen a Reflow Oven with Vacuum? Is the result really good when it comes to reducing Voids? Can you share any info about this oven? thanks and regards...

reply »

Sibbe

#61917

Reflow Oven with Vacuum System | 25 May, 2010

i'm really intrested in that as well, because we are having some issues with our Rebel Led's

reply »

josh

#61929

Reflow Oven with Vacuum System | 25 May, 2010

Vacuum Soldering is mostly available with Vapor Phase Soldering systems as a option.

Asscon / IBL / Rehm Thermal all offer this...

Rehms system is unique as they offer in place solder and vacuum vs the other two vendors that move a PCB with Molten Solder into a seperate Vac Chamber. Rehms system also has many other process benefits over other Vapor Phase methods...

Vacuum does reduce or remove voids, can also control wetting to a degree. Of course too much Vacuum is not good either so system needs to have good control for user and process tuning.

reply »

RuggedSMT

#62029

Reflow Oven with Vacuum System | 9 June, 2010

We have been doing pilot runs with vacuum installed on vapor phase. Voids are down but bridges are up on the .5mil BGAs.

reply »