Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Optical Scope for 5mils to 10mils Gap - Is there any Equipment ?

Views: 5384

#61783

Optical Scope for 5mils to 10mils Gap - Is there any Equipment ? | 7 May, 2010

I'm looking for an optical scope that can penetrate through a gap of 0.005" to 0.010". Is there anything available in the Electronics / Semiconductor Industry for this kind of application? I want to see what's inside that size of gap for solder shorts or solder formation.

thanks and regards

reply »

#61784

Optical Scope for 5mils to 10mils Gap - Is there any Equipment ? | 7 May, 2010

Is this gap by any chance under a device, like a BGA or LGA? There are several scopes for that type of inspection, if that is what you are describing.

reply »

#61791

Optical Scope for 5mils to 10mils Gap - Is there any Equipment ? | 10 May, 2010

This is not for a BGA.

reply »

#61794

Optical Scope for 5mils to 10mils Gap - Is there any Equipment ? | 10 May, 2010

Check out these guys:

http://www.ysctech.com/

reply »

#61795

Optical Scope for 5mils to 10mils Gap - Is there any Equipment ? | 10 May, 2010

Could you be looking for an endoscope with a 10 mil O.D? Not aware of anything that small. Am I reading you correctly? You are trying to peer into a 5 or 10 mil opening to see what's happenning inside of something? 'hege

reply »

#61805

Optical Scope for 5mils to 10mils Gap - Is there any Equipment ? | 11 May, 2010

yes sir you are right. at least 10 mil diameter endoscope.

thanks and regards

reply »

#61811

Optical Scope for 5mils to 10mils Gap - Is there any Equipment ? | 12 May, 2010

http://zibracorp.com/milliscope%20II.html

.4mm (.015") endoscope still too big?

Regards, Mike

reply »

#61915

Optical Scope for 5mils to 10mils Gap - Is there any Equipment ? | 24 May, 2010

thank you very much guys for those info...I found one and the smallest is 25mils

reply »

See Your 2024 IPC Certification Training Schedule for Eptac

Sell Your Used SMT & Test Equipment