SPC/Calibration for BGA rework machine

Subscribe to Thread

What do other people use to ensure that the BGA machine is w... - Apr 19, 2010 by Bryan

You should check the optical alignment and thermal calibrati... - Apr 20, 2010 by davef

Bryan

#61642

SPC/Calibration for BGA rework machine | 19 April, 2010

What do other people use to ensure that the BGA machine is within spec ie beform a weekly check and record on SPC charts?

We want to start recording this can a plate or some kind of surveyor be used on the machine ?

reply »

davef

#61658

SPC/Calibration for BGA rework machine | 20 April, 2010

You should check the optical alignment and thermal calibration of the BGA rework station periodically [every six months]. Likely, the equipment supplier gives recommendations on this calibration effort, maybe in the manual.

reply »

SMTnet
»
Electronics Forum
»
SPC/Calibration for BGA rework machine

Reflow Soldering 101 Training Course

Training online, at your facility, or at one of our worldwide training centers"

Benchtop Fluid Dispenser

Now Online

58
Visitors

1
Member

Who are SMTnet visitors?

Become a member now and receive the value and benefits of membership.

Encapsulation Dispensing, Dam and Fill, Glob Top, CSOB